Indentification Number Code - CEAG Cooper Crouse-Hinds GHG 6 Série Mode D'emploi

Dimensional drawings
dimensions in mm
X = fixing dimensions
Distribution, size 7
Distribution, size 6
Explosion-protected flameproof enclosures and
distributions, Series: GHG 6..
1.2
Code for manufacturer
Code for flameproof enclosure
Code for enclosure material
Code for enclosure size
* available in sheet steel only
Code for cover versions
Identification number code
5 = CuNi- alloy
6 = aluminium alloy
7 = steel sheet
1 = 210x210x203 mm
2 = 320x320x203 mm
4 = 320x320x329 mm
5 = 430x430x329 mm
7 = 430x650x329 mm
6 = 650x650x505 mm *
4 = with switch actuation
5 = without switch actuation
6 = with glass Ø 80mm
(with switch actuation)
7 = with glass Ø 80mm
(without switch actuation)
8 = with glass Ø 150mm
(without switch actuation)
See " Operating Instructions
GHG 660 7003 P0004 "
for the technical data of the connection
and bus bar boxes, as well as of the control
and indicating components.
The technical data and instructions for built-in
explosion-protected components not
described in these instructions can be found
in the accompanying documents.
Cooper Crouse-Hinds GmbH
GHG 6 . . . . . . R....
9 9 9 9 9