miniland baby 89055 Mode D'emploi page 14

· For matching more additional camera, select Channel 3 or 4 by pressing Channel
button at the back of the monitor.
· Repeat the above process for 'PAIR' for additional cameras.
· Use the Channel button to check the pictures from different Cameras.
· For Deleting, Push the Channel button at the back for about 3 sec. Press this
Channel button to select the channel to be deleted.
· Then use Adjustment button (+) (-) to choose "DEL". Then press MODE, the
deletion process completed.
TROUBLESHOOTING
Problem
Screen turns
on and off
No reception
at monitor
No transmission
at Camera
Blurred image
All manuals and user guides at all-guides.com
Possible Cause – things to do/check
- The AUTO mode is selected on the camera, when there is no
noise detected by the camera it stops transmitting to save power.
Screen then turns off.
Select the CAMERA MODE on the camera to disable this function.
- Unit has not been switched on.
- AC/DC adaptor has not been connected.
- Adjust the position of the Camera or monitor.
- No Battery Power (check LED indicator (16)
- The transmitter may not be transmitting. (either not powered on
or in voice activation mode)
- Wrong Channel
- Unit has not been switched on.
- AC/DC adaptor has not been connected.
- Check if the CAMERA AUTO mode is switched on.
- The camera lens is not properly adjusted.
- Move the camera lens (3) to focus the image.