miniland baby 89055 Mode D'emploi page 12

Connection of Power Supply
· This Intercom is designed to be powered by either batteries or the provided AC/DC
adaptors.
Never use rechargable batteries as this device is non-chargeable.
Use AC/DC adaptor:
· Plug the connector of the AC adaptor to the socket on the unit.
· Plug the adaptor into a mains socket.
· Switch on the power switch of the unit.
Camera:
· Unscrew and remove the battery cover at the bottom of the unit.
· Insert 4 x AA size alkaline batteries (not supplied) in accordance
with marking of the battery compartment. Refit the battery
cover and secure with the screws.
Please note:
· When the power indicator on the Intercom unit starts to blink continuously. It's time
to change the batteries. It is advisable to use AC/DC adaptor (supplied) for long
period of use.
· Remove the batteries during long periods of non-use.
Warning:
Improper use of the adaptor may cause malfunction of the units. Please consult the
Miniland technical service for any queries. Use only the AC adaptors supplied in
the packaging.
OPERATING INSTRUCTIONS
· To turn ON the camera unit, press the ON/OFF switch (1) located at the front of
the camera for about 2 seconds.
Camera MODE Switch (12)
· CAMERA – in this mode the camera transmits an image and sound continuously,
a useful function for uninterrupted surveillance.
· AUTO – in this mode the camera is on standby and is only activated when a noise
is detected – subject to the sensibility of the programmed volume.
· This mode is particularly useful at night as even though it is connected to the
intercom no sound is transmitted, helping you to sleep more easily. Whenever a
noise is detected the camera will resume the transmission of image and sound.
· When you select this AUTO mode on the Camera and if there is no noise around
the camera, it will go onto standby using the minimum power and may appear to
be turned off but is in fact still turned on. The Intercom screen will turn off when
the camera is not transmitting.
Note to disable this AUTO MODE, select camera mode on the camera.
All manuals and user guides at all-guides.com