miniland baby 89055 Mode D'emploi page 13

Infrared Night Vision (Automatic)
· The infrared night vision of the camera is designed to allow the camera to pick up
pictures in the dark or places with very poor light.
· In this mode only a black and white image can be seen on the monitor and only
objects placed within 6ft/2m will be observed.
· The camera constantly monitors the light level by light sensor (10) and switches to
the infra-red mode automatically whenever there is insufficient light for normal
vision so that you don't need to risk disturbing your sleeping child.
Channel Matching (Synchronization)
· This Additional Camera can be paired up with your monitoring system (item
number 89039) to allow monitoring different areas. Your original
monitoring system Monitor and Camera are set on Channel 1 by manufacturer at
factory. You need to choose a new channel to 'match' this Additional Camera with
existing monitor.
· Turn OFF both the Intercom and the NEW Camera first. Place them not more than
2 feet apart.
· Turn the monitor ON. Keep Push the Channel button at the back for about 3 sec.
Synchronization process is entered. The screen will show up" PRESS CH BUTTON
TO SELECT CHANNEL. PRESS +/- BUTTON TO SET. PRESS MODE BUTTON
TO ENTRY."
Use the channel button to choose the required channel. For example, to choose
channel 2.
· Once channel 2 is chosen. Use Adjustment button (+) (-) to choose "PAIR". Then
press MODE button to lead the whole Intercom unit into Synchronization situation.
The screen will show up "SYNCHRONIZATION..." meaning it is ready to 'match'
with new camera.
· Then Turn ON the NEW Camera. Press and hold the hidden SYNCHRONIZATION
button (10) through the small hole at the back of the Camera using a pin.
The Power LED Light will start flashing, indicating Synchronization process is
activated. Remember the Intercom unit must be ready as above mentioned.
· The Camera unit will make one long beeping sound and the power LED stops
flashing, indicating successful Synchronization, while at the same time the Intercom
unit's screen will show up" PAIRING SUCCEED, CH2 SELECTED. PLEASE
PRESS MODE TO EXIT." So, Press MODE button, you can see image instantly
with CH2 displayed on screen showing which channel you are in.
All manuals and user guides at all-guides.com