End Of Cook Cycle Mode; Preset Program Cook Mode; On The Fly Cooking - Whirlpool PRO 25 IX Mode D'emploi

Table des Matières

Les langues disponibles

8. End of Cook Cycle Mode

1) After the time has expired in a Manual Cook Mode, or a Preset Program Cook

Mode, the oven shall go into The End of Cook Cycle Mode.

2) During this mode, "End" displays.

3) If either User Option OP:11 or "OP:12" is selected, the oven shall continue to sound until

the user acknowledges this by either opening and closing the door or pressing the "

pad. If User Option OP:12 is selected, after the 3 seconds beep, the oven shall go into

Ready Mode.

1) This mode allows cooking of food items through a one pad touch operation.

While in Ready Mode,pressing one of te digit keys on the keyboard will cause

the oven to run the Preset Program associated with that key.

2) LED displays the remaining cooking time. If it is multi-stage cooking, the total remaning

cooking time displays not a particular stage cooking time.

3) If the program chosen exceeds the maximum time allowed by User Option 7, then the

oven shall beep three times rapidly and display 00:00 to indicate that the program

is unacceptable.

4) When cooking program finish, the oven will enter End of Cook Cycle Mode.

If you press "

1) The use may start another cook cycle while the oven is cooking or paused.

2) While the oven is cooking or under Pause Mode, if User Option OP:51 is selected

press number buttons, the preset cooking program will start automatically.

3) LED displays the remaining cooking time.

4) When cooking program finish, the oven will enter End of Cook Cycle Mode.

If you press "

" button under this mode,the oven will enter Pause Mode.

Table des Matières