All manuals and user guides at all-guides.com
Product description
A Power supply/charger
1
B Charging plug
C Charging socket
D ON/OFF switch
E Release button for suction nozzle N Battery vacuum cleaner
F Suction nozzle
G Electric suction brush, large
H Cover, removable
Before use
Push the electric suction brush into the basic unit until the release buttons on
2
the side snaps in audibly. To remove it press the release buttons and pull the elec-
tric suction brush downwards
The handle can now be set to the required working height.
3
Loosen the handle by turning to the left (counter-clockwise), pull it to the required
length and secure it again by turning to the right (clockwise).
Insert the battery vacuum cleaner in the basic unit with the suction nozzle
4
downwards and push it to the back until it snaps in audibly. To remove it press the
release button and using the handle remove the battery vacuum cleaner.
The basic unit can be maneuvered easily with the handle pulled out, while the electric
suction brush remains firmly on the floor. The battery vacuum cleaner remains standing
independently in the upright position and thus makes working breaks or charging the bat-
tery possible without having to place the appliance against a wall or similar.
Charging
The lead-acid battery ( nominal voltage 6 V – charging capacity max. 4.5 Ah ) of the bat-
tery vacuum cleaner is charged only partially and must be recharged approx. 24 hours
before use.
Plug the charging plug into the charging socket on the battery vacuum cleaner and the
power supply/charger into a socket. It is normal for the unit to become warm during char-
ging.
It is advisable to recharge the battery vacuum cleaner after each time it is used so that it
is fully charged and ready for the next use.
Avoid a total discharge of the batterry. This could damage it and reduce the maximum
charging capacity, i.e. shorten the running time.
Note:
The ON / OFF switch must be switched off while charging.
I
Suspension loop
K Handle, height-adjustable
L Vacuum cleaner release button
M Basic unit
O Crevice nozzle
P Wet nozzle
Q Wet nozzle, large
9