AMQ KINEX Guide D'installation page 8

PHASE 1 | Hardware, Components & Optional Accessories
Hardware
M6*10
x6
Components
Column (left & right)
(3-Stage, 2-Stage or
Fixed Column)
Cantilever set
(left & right)
Beam Bottom
Cover x2
These drawings identify the parts included with your Height Adjustable Table. Some of these parts are considered by regulatory bodies
to be critical components. If any parts shown here do not match your order, please contact AMQ at cc@amqsolutions.com
Optional
LED Handset
with 4 presets
ST4*20 x2
KINEX INSTALLATION GUIDE | 8
M10*22 ST3*20
x10 x2
SR Beam (48", 60"or 72")
Feet set
(either 22" or 28")
Bridge Beam Side
Connector Cover x2
Screen Clip x2 SR Cross Beam & Cover
M6*10 x4 Set (for 24" or 30")
ST5*20 M6*12
x18
Stretcher Frame
Standard
Handset x1
Not including the above electricals for fixed height
NOTE:
Kinex (using fixed columns)
Beam Front
Cover x2
SR Power Pole
Adapter
M6*10 x4
M6*10 x6
M10*22 x2
KINEX SINGLE RUN
M6*10 x4 Allen Keys
x8 (16 screws
already
pre-mounted)
Worksurface
(48", 60"or 72" in width
23" or 29" in depth)
Power Cord Connector
x1 Cables
(6 pins) x1
Electrical Outlet Beam Screen Clip
Cover x6 Hole Cover x2
Top mounted bracket x2
Self Tapping Screw* x4
*used in direct mounting
amqsolutions.com