Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PHASE 5 | Screen Clip Cover & Cross Beam Cover Assembly
2
3
4
Step 1
Tighten all 8 pre-installed socket screws to
secure the stretcher frame .
Step 2
If there is no screen clip required, just cover the
holes with the screen clip covers .
Step 3
Install the cross beam covers .
KINEX INSTALLATION GUIDE | 28
5
Step 4
Cover the hole with the cross beam side cover .
Step 5
Secure the cross beam cover with three M6*10
screws per side .
KINEX DOUBLE RUN
1
amqsolutions.com
Publicité
Table des Matières
