Sonoff RF Bridge Mode D'emploi page 7

SONOFF TECHNOLOGIES CO., LTD.
Operating Instruction
1. Download "eWeLink"APP
2. Power on
Use the Micro USB cable to power the device, After powering on, the device will enter
the quick pairing mode during the first use. The Wi-Fi LED indicator changes in a cycle
of two short and one long flash.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If
you want to enter this mode, please long press the pairing button for about 5s
until the Wi-Fi LED indicator changes in a cycle of two short and one long flash
and release.
3. Add Bridge
Tap "+" and select "Quick Pairing", then operate following the prompt on the APP.
eWeLink
433MHz RF Bridge
eWeLink
Android™ & iOS
Add Device
Quick Pairing
WIFI devices can be added in this mo
de(make sure the device is in pairing
mode).
Scan QR code
GSM devices and devices with QR co
de can be added in this mode.
Sound Pairing
Add device in this mode if your
devic e support this feature.
6
English