Introduction - Jofel Jet-Smart AA24050 Manuel D'installation

EN

2. INTRODUCTION

The main features of the Jet Smart hand dryer are the following:
• Automatic functioning. The hand dryer will automatically turn on when hands are detected by IR
sensors. Sensibility of these sensors can be regulated through the potentiometers placed inside
the device.
• HEPA filter . The device is equipped with large HEPA filter what allows less frequent replacement
and facilitates aspiration, what increases air flow. The filter is easy to access, clean and remove.
• Antibacterial ABS. The device is manufactured from ABS plastic which contains some additives
that avoid proliferation of bacteria, fungi and mould.
• Water tank. Hand dryer has a wáter tank to recover wáter from hands during drying process. The
wáter tank must be empty and cleaned regularly.
• High performance and low consumption. Heating element of the device turns off automatically
when room temperature is above 25º, saving energy.
• High performance. Drying time is only between 10 to 12 seconds, what makes it suitable for areas
with high traffic of people.
• Alarms. Several alarms are included to warn about maintenance needs: water tank full, change of
HEPA filters, change of motor brushes.
Pag.4 JOFEL INDUSTRIAL S.A.
JET SMART HAND DRYER
C/ La Rioja nº3 Alicante, España www.jofel.com