Mantel/Top - Twin-Star International 23CM100 Manuel

Electric
Fireplace Insert
E-5
All manuals and user guides at all-guides.com

Mantel/Top

G
M
L
Completed
Assembly
Completed
Unit
Install
Insert
From Back
11. Locate Mantel/Top (G) and lay
finished side up on top of completed
assembly. From the inside, attach
the Mantel using Bolts (L) and Washers
(M) through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
12. Using Phillips head screwdriver tighten
all Bolts alternating top and bottom, left
and right.
13. Remove the two mounting brackets
attached to the back of the Left and
Right Front panels. Set aside with the
wood screws.
PLEASE READ ALL "ELECTRIC
FIREPLACE INSERT"
INSTRUCTIONS PRIOR TO
INSTALLING ELECTRIC INSERT
IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL
THE INSERT IN YOUR
FIREPLACE CLOSE TO ITS
FINAL POSITION.
14. Lift insert carefully into the back of the
unit and center in the insert opening. Do
not drag insert across Hearth/Base (A) as
it may scratch your unit.
15. Install the mounting brackets to hold
insert flush against the inside of the
mantel front panel.
MOVE YOUR COMPLETED UNIT
ONLY SHORT DISTANCES.
MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO
PEOPLE TO MOVE COMPLETED
UNIT INTO ITS FINAL POSITION.