Know Your Juice Extractor - Hamilton Beach 67333 Mode D'emploi

Know Your Juice Extractor

To Disassemble: Unplug cord from
outlet. Unlock both safety latches by
pulling out bottom of latch. Remove
cover, then lift up separator with
cutter/strainer.
1. Food Pusher
2. Food Chute
3. Cover
4. Cutter/Strainer
5. Pulp Bowl
6. Separator
7. Juice Spout
8. Safety Latches
9. Power Switch
10. Motor Base
Before First Use: After unpacking
the juice extractor, wash everything
except the base in warm, soapy
water. Rinse and dry immediately.
Never immerse the base in water;
wipe it with a damp sponge.
Important Information
• The juice extractor is manufactured
for NORMAL HOUSEHOLD USE. If
you have large quantities, such as
10 pounds or more, process in small
batches, allowing motor to cool
completely between uses.
• When juicing CARROTS, DO NOT
PACK food chute. Place carrots in
food chute one by one, and use
gentle pressure.
• DO NOT OVERLOAD THE FOOD
CHUTE. For best results, simply drop
food pieces, one at a time, into
chute. Gently and slowly press with
food pusher. This will extract the
maximum amount of juice.
• If the juice extractor SEEMS TO
STRUGGLE or slow down, turn the
unit OFF and unplug. Thoroughly
wash the cutter/strainer and separator
according to instructions. Reassemble
and continue juicing.
3