SPECIFICATIONS
MODEL:
POWER SUPPLY:
TOTAL INSTALLED POWER:
IRON POWER:
BOILER POWER:
BOILER CAPACITY:
WATER CAPACITY:
OPERATING STEAM PRESSURE:
MAXIMUM PRESSURE:
WEIGHT:
OVERALL DIMENSIONS:
PLUG:
MADE IN ITALY
IMPORTANT
Iron for Model EVG-241 is hard-wired into boiler.
Iron for Model EVG-242 must be plugged into boiler. See instructions below.
Boiler for these models must be plugged into a suitable 15 AMP outlet.
For transport, use the proper handle. Never pull the electric cable.
1. NEVER UNSCREW THE WATER CAP (WITH SAFETY VALVE) DURING USE (WHILE
THE BOILER IS UNDER PRESSURE) as the pressurized steam can lead to scalds.
2. UNSCREW
INSTRUCTIONS.
3. RISK OF FIRE – Turn off the boiler and iron switches and unplug the boiler when finished
ironing.
4. To avoid a circuit overload, do not operate another high voltage appliance on the same circuit.
SAVE THESE INSTRUCTIONS
SPECIAL SAFETY INSTRUCTIONS
THE
WATER
CAP
EVG-24 series
120 V - 60Hz
1700W
700 W
1000 W
2.8 L. / 0.7 U.S. gal (INOX)
2.3 L. / 0.6 U.S. gal
280 kPa (41 psi) (2.8 bar)
500 kPa (72 psi) (5 bar)
8.2 kg.
26x36x28 h. cm
15 Amp
ONLY
AS
INSTRUCTED
3
IN
OPERATING