RIDGID ProPress Mode D'emploi page 6

ProPress
RP 210. Com pact Series Jaw Sets cannot be used with
RIDGID Standard Series press tools such as the CT-
400, 320-E and RP 330. Jaw sets and press tools must be
used perpendicular to the fitting/tube being pressed.
Catalog No. Size
16958 /
1
2
16963 3 /
4
16978 1"
31228 1 1 /
Figure 2 – Compact Series ProPress Jaw Set
ProPress Rings
ProPress Rings are designed to mechanically press
ProPress fittings onto 1 / ", 3 /
2 4
individual ring is required for each tubing size.
1 1 / " rings can be actuated with either a V1 actuator and
4
Standard Series Press Tools such as the CT-400, 320-E or
RP 330, or a C1 actuator and Compact Series Press
Tools such as the 100-B and RP 210. 1
can only be actuated with the V2 actuator and Standard
Series Press Tools. 1 1 / " and 2" ProPress rings cannot be
2
actuated with Compact Series Press Tools.
The ProPress rings must be used perpendicular to the fit-
ting and tube being pressed but the ball pocket/tip feature
on the rings and actuators allows the actuator and press
tool to swivel up to 90 degrees in each direction. This
allows the rings and actuators to be used in some appli-
cations where the jaw sets and pressing tool will not fit.
The ProPress rings are marked to show the correct actu-
ator for use with that ring.
Catalog No. Description
27998 1 / " ProPress Ring
2
28003 3 / " ProPress Ring
4
28008 1" ProPress Ring
28013 1 / " ProPress Ring
1
4
28018 1 1 / " ProPress Ring
2
28023 2" ProPress Ring
26163 C1 Actuator
28033 V1 Actuator
21878 V2 Actuator
4
® Fitting System
Weight
" 2.5 lbs. (1,14 kg)
" 2.22 lbs. (1,01 kg)
2.28 lbs. (1,03 kg)
" 2.56 lbs. (1,15 kg)
4
" 1", 1 1 / ", 1 1 / " and 2" tubing. An
4 2
1 / " through
2
1 / " and 2" rings
2
Weight
0.50 lbs (0,23 kg)
0.70 lbs (0,32 kg)
0.90 lbs (0,41 kg)
1.00 lbs (0,45 kg)
1.35 lbs (0,61 kg)
2.00 lbs (0,91 kg)
2.10 lbs (0,95 kg)
4.80 lbs (2,18 kg)
4.7 lbs (2,13 kg)
Figure 3 – ProPress Ring and V2 Actuator
ProPress XL
RIDGID makes ProPress XL Rings for use with ProPress
XL Fittings. ProPress XL Rings are designed to mechan-
ically press ProPress XL fittings onto 2
ing. An individual ring is required for each tubing size.
ProPress XL Rings are actuated with R2 actuators and
Standard Series Press Tools such as the CT-400, 320-E
or RP 330. ProPress XL Rings cannot be actuated with
the Compact Series Press Tools.
ProPress XL rings, actuator and tool must be used per-
pendicular to the fitting and tube being pressed. The
pocket/actuator tip feature on the ProPress XL rings
does not allow for the tool and actuator to swivel relative
to the ring.
Catalog No. Size
93677 2 1 / " XL Press Ring Set
2
93682 3" XL Press Ring Set
93687 4" XL Press Ring Set
93692 R2 Actuator
16803 Carrying Case
XL Press Ring
Press Ring Actuator
Pivot Pin &
Pocket (Not Visible)
Torsion Spring
(Not visible)
ProPress XL Press Ring
Figure 4 – ProPress XL Press Ring and RIDGID R2
Actuator
1 / ", 3" and 4" tub-
2
Weight
4.5 lbs. (2,04 kg)
5.2 lbs. (2,36 kg)
6.5 lbs (2,95 kg)
8.4 lbs (3,81 kg)
9.0 lbs (4,08 kg)
R2 Actuator
Cylindrical Tip
R2 Actuator Arm
Side Plate
R2 Actuator
Return
Spring
(Not
Visible)
R2 Actuator Pivot Pin
RIDGID R2 Actuator