Kampa Breeze PU0161 Guide D'utilisation page 4

Instructions
Thank you for purchasing the Kampa
maximise the performance of this product, ensure that you read these instructions
before use. Please retain these instructions for future reference.
This pump is designed for inflatables such as awnings and tents and will
automatically cut-out when the preset pressure is achieved. The Breeze pump
works by first producing high airflow using its low pressure pump in order to
efficiently add a large air volume. When the pressure passes a certain level the
Breeze automatically switches to its high pressure pump in order to complete
inflation to the preset level.
Important
This pump must only be used with a DC 12 Volt power supply.
To avoid the risk of electric shock, do not use in wet conditions or submerge in
any liquid. Store in a dry place.
Do not direct airstream at face or body.
Keep the inflation and deflation ports free of any obstruction during use. Ensure
the pump has adequate ventilation during use.
Do not attempt to put any object/implement into any of the ports at any
time. This is dangerous during use but can also damage the internal pump
mechanisms.
Keep out of reach of children. Keep children and pets away from the pump
whilst in operation. Do not allow the pump to be operated by persons
unfamiliar with the product.
This pump uses a pressure induction system with a margin of error ±0.5 PSI.
Do not operate the pump continously for longer than 15 minutes as the motor
may overheat and cause internal damage. Allow the pump to cool down for 30
minutes after 15 minutes of continuous use.
Do not leave the pump unattended whilst in operation. Pay attention in order to
ensure over-inflation does not occur that could cause damage to your inflatable
item.
Do not use with any accessory or attachments other than those originally
included or recommended by Kampa UK Limited.
Do not use this pump if any part is damaged in any way. This product has no
user serviceable parts. Do not attempt any repair.
Please check that the 12 Volt power source socket is functioning correctly, is not
damaged and has no rust, residue or foreign matter inside.
Operation - Inflation
1. Start the vehicle (or switch on power source). Insert the DC plug (G) into the
12V socket.
PU0161-UM-11-15 Rev.A
All manuals and user guides at all-guides.com
Breeze pump. For safety reasons and to
®
4