Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SORHEA
Ex. n°2: The red indicator light for Tamper always matches the physical status of the
Tamper
The Tamper is networked and routed to the hub
Solution: The Tamper must be used on the sensor. Turn the switches toward the top and
4. Intrusion alarm not triggered
Ex: Passage beyond the distance set by the potentiometer.
Solution: Change the distance adjusted on the potentiometer and recommence the
5. The red LED on the card is blinking
Ex: The voltage of the power is less than 9.5v.
Solution: Check the power supply for the sensor
Image of the physical status of AP
wire them to terminals 13 and 14.
adjustment of the sensor. (§8.1)
Red LED
- 55 -
KAPIRIS III
Publicité
Chapitres
Table des Matières
