Maintenance - RIDGID R86630 Manuel D'utilisation

OPERATION
 Depress the switch trigger to start the screwdriver. Do
not lock the switch ON for jobs where the screwdriver
may need to be stopped suddenly.
 Hold the screwdriver firmly and place the bit and screw
at the point to be driven.

MAINTENANCE

WARNING:
When servicing, use only identical replacement
parts. Use of any other part could create a hazard
or cause product damage.
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
This product has a 90-Day Satisfaction Guarantee Policy, as well as a
Three-year Limited Warranty. For Warranty and Policy details,
please go to www.RIDGID.com or call (toll free) 1-866-539-1710.
All manuals and user guides at all-guides.com
NOTE: ILLUSTRATIONS START ON PAGE 9
NOTE: The bit holder is magnetized and will hold most
commercial drywall screws.
 Apply quick, snap-action type pressure to the bit. The
pressure applied will engage the clutch and drive the
screw.
NOTE: The bit will automatically stop rotating once the
pressure to the bit is released.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
8 — English