Ham EWS-830 Mode D'emploi page 9

(Manual) settings
• Press and hold the + button (36) and the – button (37) for approx. 3 seconds to stop the search for the
DCF signal. The wireless symbol (32) goes out and you can set the time manually.
• Press and hold the MODE button (35) for approx. 3 seconds to make the following settings one after the
other:
• Year (12)
• Month (14)
• Day (13)
• Time zone (12)
• Weekday (20)
• 12/24 hour format (12)
• Hours (12)
• Minutes (12)
• Town/City (17)
• To select the individual values, press the + button (36) or the – button (37) and confirm each selection by
pressing the MODE button (35).
• If you do not make an entry for 20 seconds, you automatically exit setup mode.
Note – Time zone
• The DCF signal can be received over long distances, but always transmits the current Central European
Time in Germany. Make sure you account for the time difference in countries with another time zone.
• If you are in Moscow, the time is 3 hours later than in Germany. This means that you should set +3 for
the time zone. The clock then automatically sets the time to 3 hours after the DCF signal received or
relative to the manually set time.
Note – Weekday
You can choose from German (GE), English (EN), Danish (DA), Dutch (DU), Italian (IT), Spanish (SP) or
French (FR) for the weekday display.
Note – Town/City
The sunrise (15) and sunset (18) entry depends on the location. For this, select one of the 150 towns/cities
from the list at the end of these operating instructions.
Celsius / Fahrenheit
• Press the – button (37) to switch between °C and °F for the temperature display.
8
All manuals and user guides at all-guides.com