brondell BALANCE P400 Serie Manuel De L'utilisateur page 18

7 TROUBLESHOOTING (cont.)
CONDITION
Poor performance,
or not purifying at
optimum capacity.
15
POSSIBLE CAUSE
Filter is due for replacement.
Blockage at Air Inlet or Air Outlet.
Plastic wrap on filters not removed. Remove the plastic wrap and put
Clearance around appliance not
adequate for air ventilation.
Missing filters or filters were
inserted in the wrong order.
Exceeded expected room coverage
area.
POSSIBLE SOLUTION
Replace with new filter set.
Contact the Brondell Service Center.
filters back in.
Ensure that there is clearance of
20" on each side and 4" in the back
of the appliance.
Ensure all 3 filters are placed in the
correct order (see Page 3 of this
manual).
Suggested room coverage area is
approximately 260-300 square feet.