Night Mode; Eco Mode; Fan Speed Mode; Filter Replacement Indicator - brondell BALANCE P400 Serie Manuel De L'utilisateur

4 OPERATING YOUR O2+ BALANCE AIR PURIFIER (cont.)

4.2.2 NIGHT MODE

If the Balance is in AUTO mode and the room has been dark for 3 minutes, the appliance will
automatically switch into Night Mode. In Night Mode, the air quality indicator and control lights
will turn off and the fan speed and noise level are reduced.
Once the room becomes light for 5 minutes or more, the appliance will resume normal light
indicators and operation. You may also press Fan Speed to manually take the unit out of Night Mode.

4.2.3 ECO MODE

If the appliance is operating in either Auto Mode or Fan Speed Mode, you can press Silent on
the control panel or remote for Eco Mode. Eco Mode automatically turns the fan speed to the
lowest setting to conserve energy and only the Silent light will illuminate.

4.2.4 FAN SPEED MODE

If you prefer not to use the Auto Mode, you can manually change the fan speed by pushing the
Fan Speed button.
1. Press the Fan Speed button on the control panel or remote until the light indicates the
desired fan speed; 1, 2, 3 or Turbo (all three lights lit).
2. The appliance will remain in the chosen fan speed until a new fan speed is chosen or the
Auto Mode is activated.
Fan Speed

4.2.5 FILTER REPLACEMENT INDICATOR

The filter life is good for approximately 1 year (8,760 hours of use). Once the life of the filters
has expired, the Filter Replacement Indicator will let you know it's time to change the filters.
After 1 year of use, the Filter Replacement indicator LED will flash and light up indicating it's
time to change the filters. In addition, the machine may beep to remind you to change the
filter. After 168 hours, the machine will go into Lock Mode and you will be unable to operate
it until the filters are changed and the indicator button has been reset. See section 5 on Filter
Replacement
9
Low Medium High Turbo