Proline CR75P Manuel D'utilisation page 6

All manuals and user guides at all-guides.com
3. The radio will switch on automatically at the pre-set alarm time.
4. The alarm can be temporarily stopped for 9 minutes by pressing the Snooze Button (5)
once. This can be repeated up to 5 times.
5. The alarm will switch off automatically after 1 hour 59 minutes or can be cancelled by
switching the Function Selector (11) to the "OFF" position.
6. The alarm will activate again after 24 hours unless the Function Selector (11) is set to
"OFF".
WAKE TO ALARM
1. Follow the instructions for "ALARM TIME SETTING" above.
2. When the desired alarm time has been selected, set the Function Selector (11) to the
"AUTO position.
3. Turn the Volume Control set (2) fully clockwise to select the BUZZ function. (When you
hear a "CLICK" the function is active.)
4. The alarm tone will switch on automatically at the pre-set alarm time.
5. The alarm can be temporarily stopped for 9 minutes by pressing the Snooze Button (5)
once. This can be repeated up to 5 times.
6. The alarm will switch off automatically after 1 hour 59 minutes or can be cancelled by
switching the Power Selector (11) to the "OFF" position.
7. The alarm will activate again after 24 hours unless the Function Selector (11) is set to
"OFF".
SLEEP TO RADIO
The radio can be set to switch off automatically after a period of time from 1 minute to 1 hour
and 59 minutes, by following this procedure:-
With all the controls pre-set in the "WAKE TO RADIO", or the Function Selector (11) in the
"OFF" position, press simultaneously the Sleep Set Button (8) and the Minute Set Button (9),
or Hour Set Button (10) until the display shows the exact sleep time you wish the radio to play
before switch off. To switch off the radio before the end of the programmed sleep time period,
simply press the Snooze Button (5) once.
SETTING PROJECTION CLOCK
There are two separate clocks in this product.
THE LED DIGITAL CLOCK AND THE PROJECTION CLOCK MUST BE SET SEPARATELY.
1. Switch on the projection clock with the Projection On/Off Selector (16).
2. Hold the clock radio with the clock display face down and the projection clock hinged out to
face a dimly-lit wall opposite the projector.
Focus the projection clock with the FOCUS thumbwheel (20).
3. To set the HOURS, press and hold the Projection Time Set Button (19) then repeatedly
press the Projection Hour Set Button (22). Until the hour you require is displayed.
4. To set the MINUTES, press and hold the Projection Time Set Button (19) then repeatedly
ENGLISH 5