Connect The Power Cord - Honeywell Lyric C1 Mode D'emploi

Installation
Download the Honeywell Lyric app
Note: Have your Wi-Fi password available and
confirm your router communicates at 2.4 GHz before
installation.
1 Make sure bluetooth is enabled on your mobile
device.
2 Search for Honeywell Lyric in the App Store or
Google Play.
3 Download the Honeywell Lyric app.
Launch the Lyric app
4 Launch the Lyric app.
5 Select the Lyric C1 Wi-Fi Camera to install, then create
an account (if necessary), or sign in to your Lyric
account.
6 Follow the instructions in the Lyric app to name the
camera and its location.

Connect the power cord

7 Remove the camera base and plug the power
cord's USB end into the camera.
8 Reinsert the camera base and plug the
camera into a power outlet.
9 Wait until the LED on the camera blinks blue
(about 1 minute), then tap NEXT.
Note: If the LED turns solid red, it means the
connection mode timed out. Unplug the camera and plug it back in.
Lyric
2
GET IT ON
Carrier 8:08 AM 100%
Add New Device
Select a device to installl
Lyric Round
Lyric Water Leak &
Freeze Detector
Lyric C1 Wi-Fi Camera