Control Panel - Vortice DEUMIDO ELECTRONIC E20 Notice D'emploi Et D'entretien

CONTROL PANEL

1 - "ON/OFF" button.
2 - Timer button for delayed action ON/OFF
settings.
2
3
1 - R.H. percentage permitted: Continuous mode
(the appliance will continue operating non-stop),
50%, 60%, 70%, 80%.
2 - Humidity conditions (good, fair, bad)
Good: between 50% and 70%
Fair: between 30% and 50% or between 70%
and 80%.
Bad: More than 80%.
3 - Compressor operating (if the anti-frosting system
cuts in, the water drop symbol
flashes)/Compressor not operating/Tank full.
4 - Timer indicator from 1 to 24 hours.
All manuals and user guides at all-guides.com
3 - Display
4 - "SPEED" button (for selecting speed setting)
5 - "HUM" button (for selecting permitted Relative
Humidity (RH) setting)
1
4
5 - Room humidity indicator. Can also show the
temperature in degrees Celsius (°C). To display
this information, press the "HUM" button for at
least 2 seconds.
6 - Fan speed indicator: High speed/low speed.
6
5
17