Assembly - Breville BFP005 Manuel D'instructions

Assembly

• Position the Processing Bowl onto the
Motor Base and turn the bowl clockwize
until the handle locks to the front.
• Before placing the lid onto the Processing
Bowl, place your Geared Spindle and position
it over the coupling in the center of the
Processing Bowl.
• If you intend to dice larger quantities
(more than 5 cups) please insert the Dicing
Distributor after placing your geared spindle
into the bowl. The Dicing Distributor will
help to distribute diced food evenly across
the bowl.
• Place the Dicing Grid, ensuring to align with
the 4 tabs in the bowl, then insert the
Dicing Disc.
WARNING
Do not touch the blades
of the Dicing Grid.
They are extremely sharp.
• Make sure you follow the right order and
to match your Dicing Disc with your
Dicing Grid. Each Dicing Grid creates cubes
in different sizes and has its corresponding
Dicing Disc in matching size.
• Do not use your Dicing Kit with the Disc
Spindle. Always use the Geared Spindle.
NOTE
Only use the Dicing Kit with BFP820
Food Processor or BFP006 Bowl&Lid.
6
Small
Feed Chute
Medium
Feed Chute
Large Feed
Chute
Lid
Dicing
Disc
Dicing
Grid
Dicing
Distributor
Geared
Spindle
Processing
Bowl
Motor
Base