USB Case Installation
1) Use a panel removal tool to remove the center
console.
2) Remove the OEM USB adapter by releasing the clips
from the back.
3) Feed USB (female side) from the back of the center
console. Assemble USB case as shown:
4) Press the assembled case from the front of the center
console.
FULL SIZE TRUCK
Troubleshooting
NO Audio:
- Check that the 10-pin plug jumper is secure behind CD
player
- Check the main harness connections
- Check the 4-pin plug (left side)
No Reverse Camera Video:
- Check the 12-pin camera adapter is connected behind
the glove box.
- Ensure that the RCA output is connected to the X110-
SLV/SRA
- Check if camera is enabled on the X110-SLV/SRA (refer
to the owners manual for more information)
Chevrolet/GMC
3/5