Accessory List - Alpine KCX-BOSE-GM Manuel D'installation

Accessory List

KCX-BOSE-GM
Module
Installing KCX-BOSE-GM Module
1) Use a panel removal tool and a 7mm deep socket to
carefully remove the radio bezel.
2) Remove the CD player to find the 10 pin plug and
connect the 10-pin CD jumper.
3) Connect the main harness to the KCX-BOSE-GM
module.
4) Secure the KCX-BOSE-GM module above the CD
player.
KCX-BOSE-GM
Module
10-Pin CD
Main Harness
Jumper
FULL SIZE TRUCK
USB Case
Trucks with OEM Camera
1) Using a T15 Torx, remove the 6 screws to remove the
glove box.
2) Locate the Grey 12-pin connector and disconnect
from the control module.
3) Connect the Reverse Camera Adapter to the X110-
SLV/SRA direct camera adapter.
Note: Reverse Camera adapter included in X110-SLV/
SRA. See X110-SLV/SRA owners manual for more
information.
Chevrolet/GMC
2/5