STEP 4. END USER APP
a.
Download the My Home Alarm App for Android/iOS
b.
Login with credentials provided on the back of this quick guide
c.
When logging in for first time change username and password. Then enter recovery email address
d.
Within the App, select menu button and then settings option
e.
Select notifications and adapt as per the on screen instructions
f.
If you require remote arming/disarming follow step 5 of this guide
g.
Provide a demo for your customer
STEP 5. REMOTE ARM AND DISARM
Firstly, configure the panel as below:
a.
Configure a momentary/latching keyswitch – refer to manufacturer's guide
b.
Wire OUT (orange wire) to the momentary/latching keyswitch of the panel
c.
Configure a programmable output from the panel to Activate (switch to ground) when the panel is
armed and to deactivate when disarmed – refer to manufacturer's guide
d.
Wire the programmable output to IN (white wire) on the MiniAir
Please note: A relay may be required when configuring a panel with a latching keyswitch
Secondly, configure the App:
a.
Enable Open/Close reporting on the panel
b.
Enable arming/disarming from the settings menu on the My Home Alarm App
c.
Ask the customer to enter a remote pin of their choice
d.
Arm/Disarm from the panel's keypad within 2 minutes to complete synchronisation
TROUBLESHOOTING
If you have issues receiving events try the following settings of the panel:
Disable "Telephone line monitoring"
Disable "Wait for dial tone" option
Use "A" instead of "0" in the account number
If there is more than one partition, enter an account number for each partition. For certain panels you may
need to also specify an account number for the main partition (sometimes referred to as system number)
WARNINGS
Wiring should only be done when the unit is powered down
Ensure, once connected, the aerial is positioned outside the panel
SUPPORT
UK Tel:
+44 (0) 1895 474 444
Ireland Tel: 1800 855 695
Email:
support@csl-group.com
Hours:
08.30 to 18.00 weekdays, 10.00 to 16.00 Saturday
Visit
www.csl-group.com
7
for the latest copies of all manuals.