Revab CANTO NXT Mode D'emploi page 53

All manuals and user guides at all-guides.com
C C
D D
A
Settings and adjustments
Adjusting the width
1. Loosen the screws (B) fully.
2. Set the armrest to the required width.
3. Tighten the screws in the required press-
in nut and slot of the armrest.
Side cushions
The height and depth of the side cushions
are adjustable.
Adjusting the depth
1. Loosen the socket screws (C).
2. Set the side cushions to the required
depth.
3. Retighten the socket screws.
Adjusting the height
1. Loosen the socket screws (D).
2. Set the side cushions to the required
height.
3. Retighten the socket screws.
Seat width
Follow the instructions on page 15 to adjust
the seat width.
Lower leg length
1. Loosen the socket screw (A) one turn.
2. Set the legrest to the required lower leg
length.
N.B.: make sure the legrest is at least
5 cm off the floor.
3. Retighten the socket screw.
GB21