Electrical Installation - Inventum VDW9001B Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION
• Place the appliance on a solid (concrete) base that is level and stable.
• Adjust the adjustable feet of the appliance to ensure the appliance is standing level and balanced.
• After installation, let the dryer rest still for 24 hours before using it. Failure to do so may
result in a heat pump failure which shall not be covered by the warranty.
• If the dryer has to be laid down on one of its sides during transport or servicing, place it on its
left side downwards as seen from the appliance front.
• Before connecting the appliance to the power mains, wait at least 2 hours to allow it to reach
room temperature.
• Dispose the packaging materials according to local regulations. Keep the material out of reach
of children. Danger of suffocation.

ELECTRICAL INSTALLATION

• Connect the appliance to an earthed power socket protected by a fuse that complies with
the values on the rating plate.
• Particularly make sure that the appliance is not placed on the power cord.
To avoid danger, a damaged power cord may only be replaced by the manufacturer,
its service agent or similarly qualified persons.
If the appliance is damaged, it must not be operated until it is repaired by the
manufacturer, service agent or similarly qualified persons.
• The appliance may not be connected to the power mains using an extension cord.
Do not connect the appliance to the power mains using an external switch device such
as a programme timer, or connect it to a power mains that is regularly switched on and
off by the power supply provider.
• Do not connect the appliance to an electrical outlet intended for an electric shaver or hair dryer.
• The mains plug must be accessible after installation.
Never use an extension cord or multiple plugs for making a connection.
Do not pull the plug out of the power socket if there is flammable gas around.
Never pull out the plug with wet hands.
Always unplug the appliance when it is not being used.
• Connection to the power supply has to be executed by an adequately trained technician or expert.
• Any repair and maintenance pertaining to safety or performance should be done by trained
experts.
• In case of a defect, only use approved spare parts by authorised manufacturers.
• In case of incorrect appliance connection, incorrect use, or servicing by an unauthorised
person, Inventum will not be responsible for any damage, as such damage will not be
covered by warranty.
EXPLOSION AND FIRE HAZARD
• Please do not dry clothes with any flammable substances such as kerosene or alcohol.
Otherwise, there may be an explosion.
• The appliance contains an environmentally friendly but flammable R450a refrigerant.
Keep away from open flame and other sources of ignition.
• The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
• Do not dry unwashed items in the tumble dryer.
33
English

Publicité

Table des Matières
loading

Table des Matières