Technical Specifications - Sonus Faber ELECTA AMATOR III Manuel Du Propriétaire

6 TECHNICAL SPECIFICATIONS

System
Cabinet
Tweeter
Midwoofer
Crossover
Frequency Response
Sensitivity
Nominal Impedance
Suggested amplifier
power output
Long-Term Max Input
Voltage (IEC 268-5)
Dimensions HxWxD
Dedicated Stand Dimension
Weight
Dedicated Stand Weight
2-way bookshelf/standmount vented loudspeaker system.
High rigidity spread resonance spectrum system obtained through a 3 layers constrained
sandwich construction: Solid walnut main cabinet (made of 25mm thick sheets)/Carrara
marble base (30mm thick)/Brass sheet in between. Leather covered baffle and back panel.
H28 XTR-04 DAD Sonus faber design silk dome 28 mm "Arrow Point" D.A.D. - Damped
Apex Dome™ tweeter
MW18XTR-04 Sonus faber design 180 mm cone with real time air dried non pressed
blend of traditional cellulose pulp, kapok, kenaf and other natural fibers
Anti-resonant design, optimized amplitude and phase responses for optimal space/time
performance. "Paracross topology™". Highest precision components with Clarity Cap
PP non-polarized capacitors and low resistance Jantzen inductors.
Crossover frequency: 2.500 Hz @-6dB
40 Hz – 35.000 Hz
88 dB SPL (2,83V/1 m)
4 ohm
35-100W, without clipping
20 Vrms
375 x 235 x 360 mm / 148 x 93 x 142 in
720 x 300 x 350 mm / 284 x 118 x 138 in
14,6 Kg / 32,2 lb each
9,5 Kg / 21 lb each
26