Spark BXTW04 Guide De L'utilisateur page 2

USER GUIDE
Pairing
After being taken out from the charging case, the earphones will be paired automatically.
Pairing with the smartphone
1) Take out the earphones from the charging case and confirm that the earphones are
waiting to be paired. At this time, the two earphones will flash blue lights quickly.
2) Turn on the smartphone's Bluetooth, search Bluetooth devices and click 'BXTW04'. A
voice prompt saying 'Connected' will sound then.
3) After the pairing is successful, take out the earphones from the charging case and they
will pair with the smartphone automatically.
On/off
Power on
Method 1: Take out the earphones from the charging case, the earphones will turn on
automatically.
Method 2: In off mode, press and hold the touch area of the earphones for 1 second, the
earphones will turn on, and you will hear the prompt "power on".
Power off
Method 1: Put the earphones into the charging box, and the earphones will shut down
automatically.
Method 2: Turn off the Bluetooth switch of mobile phone, and the earphone will
automatically shut down in five minutes.
Method 3: Turn off the Bluetooth switch of mobile phone, press the earphone for 1 second
and then it will shut down.
Calling
Answer a call: Touch the left or right earphone once gently.
Hang up: Touch the left or right earphone twice gently.
Dialing cancellation: During dialing, press the left or right earphone for 2 seconds.
Reject a call: Press the left or right earphone for 2 seconds.
Voice assistant
Touch the left or right earphone three times gently.
Reset
1) Delete the connection between the earphones and the phone.
2) Tap left and right earphones respectively 5 times, and then red and blue lights will flash
alternately. Within about 10 seconds, blue lights will flash alternately, indicating that both
two earphones have completed re-pairing.
3) It can be used after reconnecting with the mobile phone.
Charge
Earphones: Put the earphones into the charging box, this will automatically charge the
earphone, and the earphone will display a red light when charging.
Charging case: Use the type-c charging cable included in the package to charge the
charging case.
Earphones indicator
No pairing: Red and blue lights flash quickly
Waiting to be paired: One blue light flash quickly
Paired successfully: The indicator light is off
Power on: Red and blue light up flash quickly for 1 second
Power off / Play / Pause / Standby: The indicator light is off
Incoming call: Blue light flashes twice every 3 seconds
Calling: The indicator light is off
Charging: Red light is always on
End of charging: The indicator light is off
Notes:
1） iPhones and some Android phones can support the adjustment of phone volume if
you need to use the headphones to adjust the volume, but for some Android phones,
you can only adjust the volume of the earphone itself. If you need to restore the
default volume, put the earphones in the charging case and take them out after the
red light turns on.
2） When holding the earphone, do not touch the touch panel area of the earphone to
avoid misoperation.