General Maintenance - Google Nest Protect Guide De L'utilisateur

Masquer les pouces Voir aussi pour Nest Protect:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

General Maintenance

Cleaning your Nest Protect
Nest Protect has been designed to be as maintenance
free as possible, but you should keep it clean. As with
any smoke alarm, dust buildup on the outside or inside
of Nest Protect can stop it from working properly.
To clean Nest Protect:
1. Remove it from the wall or the ceiling (turn
counterclockwise until it comes off the backplate).
2. Wipe the outside with a clean, slightly damp cloth.
Don't use any soaps or solvents.
3. Place Nest Protect on a soft, dry cloth with the button
facing down. Open the battery compartment door
and remove the batteries. Remove the screws and lift
off the back. Be careful to not lose the screws.
4. Gently vacuum the inside. Make sure to clean
all the way around the mesh sides of the smoke
chamber (the large metal circle).
Note: Never use detergents or solvents (like glass
cleaner) on your Nest Protect and do not spray air
fresheners, hair spray or other aerosols near it. Do not
get water inside the alarm or paint over it.
20
All manuals and user guides at all-guides.com
Replacing the backup batteries
In case of a power outage, Nest Protect will use
three AA Energizer® Ultimate Lithium batteries (L91)
for backup. These batteries can be purchased at
your local retailer.
1. Turn off power to Nest Protect at the breaker
box (see p.9)
2. Twist Nest Protect counterclockwise until
it disconnects from the backplate.
3. Detach the power connector
from the back of Nest Protect
and open the battery door.
4. Replace the batteries. Align
the + positive and - negative
ends with the markings in the
battery compartment.
5. Close the battery
compartment. Do not force the door closed.
6. Reattach the power connector.
7. Push Nest Protect onto the backplate and turn
it clockwise until you feel it grip.
8. Turn power to Nest Protect back on at the
breaker box.
9. Press the button twice.
Servicing
If your Nest Protect needs servicing, first contact
our support team at g.co/nest/support to get a return
number and shipping information.
1
2
3
1
1
2
2
3
3

Publicité

Chapitres

Table des Matières
loading

Table des Matières