Programmed Play - oneConcept Discman BT Mode D'emploi

Programmed play

1. In CD stop mode, press the PROG button once, PROG bumper appears.
PROG icon and Track number"01"start flashing in the display.
2. Press SEARCH/SKIP / button to select the desired track.
3. When the desired track is displayed, press the PROG button to register. The PROG
number changes to 02. Track number returns to 00 and flashes together with PROG.
4. Repeat above steps 2 and 3 to program more tracks. Up to 20 tracks can be pro-
grammed into the memory.
5. Press PLAY/PAUSE button to start the programmed play.
6. To erase the program, in STOP mode simply press the STOP button.
ANTI-SHOCK PROTECTION
This player incorporates an electronic anti-skip circuit to prevent interruption of the sound
output when the unit is subjected to shock, vibration or rolling during disc playback. The
anti-shock system will automatically activate when a disc is playing, the ESP indicator will
appear in the display and flashing.
Once anti-skip buffer is full, it will give you approximately 120 seconds of protection
against interruption of sound output. If the player is subjected to shock or rolling for
longer than the buffer memory, some interruption of sound output will occur. This is nor-
mal and to be expected and the sound will resume once the player has stabilized from the
shock or rolling disturbance.
Note: The anti-skip function provides for continuous sound output when the unit
is subjected to shock or vibration. It will not compensate for errors arising
from the use of defective, scratched or dirty discs.
24