ThermoPro TP-65 Manuel D'utilisation page 3

Indoor base station (receiver) features
Large LCD display
Outdoor
EN temperature
Outdoor
humidity
Indoor
temperature
Four Touch Buttons :
1. LCD display: Displays the current outdoor humidity/temperature
and indoor humidity/temperature
2. Battery Compartment: Holds 2 AAA batteries to power the unit
3. Tabletop and wall-mounted design
4. Indoor Temperature range: -4 °F ~ 158°F (-20 °C ~ 70 °C).
5. Humidity range: 10% ~ 99%.
6. Temperature display unit: °C and °F selectable
7. Temperature Resolution: 0.1 °C/°F
8. Humidity Resolution:1%
9. Low battery indication
10. Four touch buttons
11. Backlight
Touch buttons
CHANNEL/SYNC: Press once to display the temperature and
humidity readings from up to 3 outdoor remote sensors; Press
and hold this button to enter the synchronization mode.
MAX/MIN/CLEAR: Touch once to display the maximum or
All manuals and user guides at all-guides.com
SIDE
Wall hanging hole
Indoor
Stand
humidity
Battery compartment
-4-
minimum temperature and humidity; Press and hold to clear
the history data.
Magnet
° F/°C/History: Press to select the temperature display in ºC
When the display shows the maximum or minimum temperature
and humidity. Touch this button once to set the maximum and
minimum data record time interval between ALL TIME or 24 hours.
Note: Both ALL TIME and 24 hours represent the time since you
last manually cleared the history data or installed a new battery.
: Touch once to turn on/off backlight. If you do not press the
button for 15 seconds, the backlight will be automatically
turned off.
Temperature & humidity trend
1. indicates the temperature & humidity is in an increasing
trend.
2. indicates the temperature & humidity is in a no change
trend.
3. indicates the temperature & humidity is in a decreasing
trend.
Outdoor remote sensor (transmitter) features
Wall hanging hole
RESET
TX LED
TX
Vent holes
-5-
or ºF;
EN
Channel 1, 2, 3
2 AAA battery