JVC AA-V20U Manuel D'instructions page 7

DURING USE . . .
The AC Power Adapter/Charger AA-V20U is
specifically designed to charge BN-V207U and/or
BN-V214U Battery Packs.
When charging a brand new Battery Pack, or one
that's been in storage for an extended period, the
Charging Indicator may not come on. In this case,
remove the Battery Pack, then reattach and try
charging again.
If you connect the DC Cord to the DC Connector
while a Battery Pack is being charged, power will
be supplied to the camcorder and charging will
end incomplete.
Vibration noise can sometimes be heard coming
from the inside of the AC Power Adapter/Charger.
This is normal.
The AC Power Adapter/Charger processes
electricity internally, and will become warm
during use. This is normal. Make sure to use the
AC Power Adapter/Charger in well-ventilated
areas only.
If the battery operation time remains extremely
short even after having been fully charged, the
battery is worn out and needs to be replaced.
Please purchase a new one.
All manuals and user guides at all-guides.com
SPECIFICATIONS
Power USA and Canada
AC 120 V`, 60 Hz
Other countries
AC 110 – 240 V`, 50/60 Hz
Power 23 W
consumption
Output power DC 7.2 V
DC 6.3 V
Operating 0°C to 40°C (32°F to 104°F)
temperature [when charging, 10°C to 35°C
(50°F to 95°F)]
Dimensions 68 mm (W) x 38 mm (H) x
110 mm (D)
(2–11/16" x 1–1/2" x 4–3/8")
Weight Approx. 255 g (0.57 lbs)
, 0.77 A (charge)
, 1.8 A (VTR)
EN-7