Table des Matières
Publicité
6
model numbers 060-2343-8 and 060-2344-6 | contact us: 1.866.523.5218
CAUTION: If received assembled, repeat
all steps to ensure that your unit is
properly assembled and all fasteners are
Examine parts for damage. Do not use
damaged parts.
missing or damaged, call 1.866.523.5218.
empty fuel tank.
normal due to carburetor adjustments and
testing done by the manufacturer.
INSTALLING TRIMMER ATTACHMENT
CAUTION: When installing trimmer
1. Loosen the coupler by turning the knob
counterclockwise.
2. Remove the shipping protector from the
coupler.
3. Remove the shaft cap from the trimmer
attachment (if present).
4. Position the locking/release button of the
attachment into the guide recess of the
coupler.
5. Push the attachment into the coupler
until the locking/release button snaps
into the primary hole.
6. Before using the unit, tighten the knob
securely by turning it clockwise.
All manuals and user guides at all-guides.com
a WARNING: Make sure the locking/
For assembly of optional attachments, refer
to the ASSEMBLY section of the applicable
attachment instruction manual.
ATTACHING THE SHIELD
CAUTION: The shield must be properly
protection from the risk of thrown
equipped with a line limiter blade which
line limiter blade (on the underside of the
For the proper orientation of the shield, see
the KNOW YOUR TRIMMER illustration in
the OPERATION section.
1. Remove the wing nut from the shield.
2. Insert the bracket into the slot as shown.
3. Pivot the shield until the bolt passes
4. Securely tighten the wing nut onto the
release button is locked in the
primary hole and the knob is securely
attachments are designed to be used
in the primary hole unless otherwise
stated in the applicable attachment
through the hole in the bracket.
bolt.
Publicité
Table des Matières
