Removing/Installing Fabric Seat Cover; Care And Maintenance; Warranty - Harmony DASH Manuel D'instructions

REMOVING/INSTALLING FABRIC SEAT COVER

TO REMOVE SEAT COVER:
Gently grasp the back of the fabric seat cover and slide
the cover off the plastic shell from the back towards the
front of the booster seat.
TO INSTALL SEAT COVER:
We recommend first sliding the fabric cover's armrests
midway onto the armrests of the plastic shell. Then,
while holding the fabric in place with one hand, slide
the front of the fabric seat cover over the front of the
plastic shell. Finally, pull remaining fabric over the back
of the plastic shell.
CLEANING YOUR SEAT COVER:
• MACHINE WASH SEPARATELY using cold water -
delicate cycle.
• DO NOT BLEACH.
• DRIP DRY to prevent cover from shrinking.
CLEANING THE PLASTIC SHELL:
• SPONGE CLEAN using warm water and mild soap.
• TOWEL DRY.
• DO NOT use solvents, abrasive cleaners, or disassemble
booster in any way, except as instructed.
This booster seat was manufactured by Harmony®
Juvenile Products (HJP). HJP warrants this product to
the original retail purchaser as follows:
LIMITED 3-MONTH WARRANTY
This booster seat is warranted against defective
materials and workmanship for THREE (3) MONTHS
from the date of original purchase. An original receipt is
required to validate your warranty. HJP will, at its option,
provide replacement parts for this product or replace
this product. HJP reserves the right to discontinue or
21

CARE AND MAINTENANCE

WARRANTY