Installing Cup Holder (When Applicable); Aircraft Installation; Instruction Manual Storage; Removing/Installing Fabric Seat Cover - Harmony YOUTH BOOSTER ELITE Manuel D'instructions

INSTALLING CUP HOLDER (WHEN APPLICABLE)

The cup holder is stored in the cavity on
the underside of the booster seat base.
• To remove from storage, twist cup
holder while pulling to release.
TO INSTALL:
1. Slide cup holder into place over cup
holder clip ❶❷ on either side until
locked in place.
TO REMOVE:
1. Pull cup holder up and outward.
This booster seat is NOT CERTIFIED for aircraft use. Aircraft
seats are not equipped with 3-point lap-and-shoulder
belts which are required for use with this booster seat.

INSTRUCTION MANUAL STORAGE

We recommend that you store
your instruction manual under
the fabric cover on the side of the
booster seat.

REMOVING/INSTALLING FABRIC SEAT COVER

TO REMOVE SEAT COVER:
Gently grasp the back of the fabric seat cover and slide
the cover off the plastic shell from the back towards the
front of the booster seat.
TO INSTALL SEAT COVER:
We recommend first sliding the fabric cover's armrests
midway onto the armrests of the plastic shell. Then,
while holding the fabric in place with one hand, slide
21

AIRCRAFT INSTALLATION

❶
❷