ATOMX
11. LIST OF ERRORS
11. LIST OF ERRORS
DISPLAY BH ERROR
ERROR 1
ERROR 1
ERROR 2
ERROR 3
ERROR 3
ERROR 3
ERROR 3
ERROR 3
ERROR 3
ERROR 4
ERROR 4
ERROR 5
ERROR 6
ERROR 6
ERROR 6
ERROR 7
ERROR 8
EN
USER MANUAL
ERROR 8
ERROR 9
ERROR 11
ERROR 11
ERROR 11
ERROR 12
ERROR 12
ERROR 12
ERROR 14
ERROR 14
ERROR 24
ERROR 24
ERROR 24
ERROR 24
ERROR 25
ERROR 26
ERROR 30
ERROR 32
ERROR 32
DISPLAY BH ERROR
REMOTE ABNORMAL SIGNAL (# 7)
REMOTE ABNORMAL SIGNAL (# 6)
REMOTE COMMUNICATION (# 20)
TORQUE SENSOR (# 24)
TORQUE SENSOR (# 13)
TORQUE SENSOR (# 25)
TORQUE SENSOR (# 34)
TORQUE SENSOR (# 35)
TORQUE SENSOR (# 36)
BATTERY UNDERVOLTAGE (# 2)
BATTERY UNDERVOLTAGE (# 21)
BATTERY OVERVOLTAGE (# 3)
MOTOR HALL SENSOR (# 26)
MOTOR HALL SENSOR (# 4)
MOTOR HALL SENSOR (# 5)
MOTOR OVERHEATED (# 19)
DRIVE UNIT SENSOR OVER
TEMPERATURE (# 17)
DRIVE UNIT SENSOR OVER
TEMPERATURE (# 18)
DRIVE UNIT CURRENT OUT OF RANGE
(LOW) (# 23)
COMMUNICATION (# 27)
COMMUNICATION (# SD1)
COMMUNICATION (# SD2)
BATTERY DISCHARGED (# 30)
BATTERY DISCHARGED (# FD)
BATTERY DISCHARGED (# NED)
DRIVE UNIT OVERCURRENT (# 0)
DRIVE UNIT OVERCURRENT (# 1)
DRIVE UNIT POWER (# 37)
DRIVE UNIT POWER (# 31)
DRIVE UNIT POWER (# 75%)
DRIVE UNIT POWER (# 50% or 25%)
DRIVE UNIT SERIAL NUMBER NOT
DETECTED (# 28)
DRIVE UNIT RESET CAUSE (# 29)
DRIVE UNIT CURRENT OUT OF RANGE
(HIGH) (# 22)
DRIVE UNIT SOFTWARE (# 9)
DRIVE UNIT SOFTWARE (# 10)
USER MANUAL
DISPLAY BH PROCESS TROUBLESHOOTING
1) RESTART THE SYSTEM.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) MAKE SURE THE DISPLAY CONNECTOR IS CORRECTLY
PLUGGED.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RESTART THE SYSTEM.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RECHARGE FULLY THE BATTERY WITH ORIGINAL
CHARGER.
2) RESTART THE SYSTEM.
3) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RESTART THE SYSTEM.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RESTART THE SYSTEM.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) STOP RIDING AND WAIT UNTIL THE MOTOR IS COOLED.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RESTART THE SYSTEM.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RESTART THE SYSTEM.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) MAKE SURE THE DISPLAY CONNECTOR IS CORRECTLY
PLUGGED.
2) RESTART THE SYSTEM.
3) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RECHARGE FULLY THE BATTERY WITH ORIGINAL
CHARGER.
2) RESTART THE SYSTEM.
3) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) REDUCE THE LOAD ON THE MOTOR BY PEDALLING
LESS OR BY REDUCING THE ASSISTANCE LEVEL.
2) RESTART THE SYSTEM.
3) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RESTART THE SYSTEM.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RESTART THE SYSTEM.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RESTART THE SYSTEM.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RESTART THE SYSTEM.
2) IF ERROR DOES NOT DISSAPPEAR, CONTACT A BH DEALER.
1) RESTART THE SYSTEM.
EN
ATOM
55
55