Bestway STEEL PRO 256002001312 Manuel Du Propriétaire page 6

immediately to avoid the pool collapsing due to the uneven loading on the frame structure. Change the location of the pool or modify the surface material.
3. We recommend positioning the pool away from any objects children could use to climb into the pool.
4. Position the pool near an adequate drainage system to deal with overflow or to discharge the pool.
5. The surface must be flat and smooth. If the surface is inclined or uneven, it can create an unbalanced loading on the structure of the pool. This situation can
damage the welding point of the liner and bend the frame. In the worst cases, the pool can collapse, causing serious personal injury and/or damage to
personal property.
6. The selected surface must be clear of any type of object. Due to the weight of the water, any object under the pool could damage or perforate the bottom of
the pool.
7. The selected surface must be clear of aggressive plants and weed species. Those types of strong vegetation could grow through the liner and create water
leakage. The grass or other vegetation that may cause odor or slime to develop have to be eliminated from the set-up location.
8. The selected location must not have overhead power lines or trees. Be sure the location does not contain underground utility pipes, lines or cables of any
kind.
9. The selected position must be far from house entrance. Do not position any equipment or other furniture around the pool. The water that comes out of the
pool during the use or due to a faulty product can damage the furniture inside the house or surrounding the pool.
10. The selected surface must be flat and without holes that can damage the material of the liner.
Follow the important instructions above to choose the correct surface and location to set up your pool. Damaged parts of the pool, due to the fact that the set-up
surface and location does not match the instructions, will not be considered as manufacture defect and will avoid the warranty and any service claims.
Suggested set-up surfaces: grass, ground, concrete, and all other surfaces that respect the above set-up conditions.
Not suggested surfaces: mud, sand, gravel, deck, balcony, driveway, platform, soft/loose soil or other surface that does not meet the above set-up conditions.
NOTE:
Check with your local city council for by-laws relating to fencing, barriers, lighting and safety requirements and ensure you comply with all laws.
NOTE:
If have a filter pump, refer to the pump's manual for instructions.
NOTE:
The ladder must match the pool size and should be used only for entering and exiting the pool. It is forbidden to exceed the permitted payload of
the ladder. Check regularly if the ladder is properly assembled.
COMPONENTS LIST
NOTE:
Some parts already have been installed on the pool.
A
F
STEEL PRO™
A
B
C
D
E
F
G
H
I
J
B
G
9 ft. x 26 in. 10 ft. x 26 in.
(2.74 m x 66 cm) (3.05 m x 66 cm)
256002001312 256002001254
x9
x9
x9
x20
x9
x20
x1
x1
x3
x1
C
H
10 ft. x 30 in.
(3.05 m x 76 cm)
256002001257
x10 x10
x10 x10
x10 x10
x22 x22
x10 x10
x22 x22
x1 x1
x1 x1
x3 x3
x1 x1
6
D
I
12 ft. x 30 in.
(3.66 m x 76 cm)
256002001261
x12
x12
x12
x26
x12
x26
x1
x1
x3
x1
E
J
13 ft. x 33 in.
(3.96 m x 84 cm)
256002001425
x13
x13
x13
x28
x13
x28
x1
x1
x3
x1