Publicité
Les langues disponibles
Les langues disponibles
Owners manual
Chest Support
Man, Woman and Child
These harnesses made of Neoprene hold the trunk while allowing some
freedom of movement.
Each side has a plastic buckle allowing for quick opening and closing during
transfers.
Chest support installation
•
The chest support is equipped with 2 friction buckles on the upper
straps. During installation, the buckles will be drilled and secured on
the backrest rigid plate (screws and sleeved nuts). In the case that the
backrest is too low, using raised anchor plates would be necessary.
•
In the case that there is no rigid plate, buckles can be installed on an anchor
bar fixed on the wheelchair handles.
•
On its lower part, the harness is equipped with 2 anchor plates. So drilling
in the backrest plate or in the wheelchair frame will be easy if it is necessary
for installation.
Raised anchor plate
3
ENGLISH
Publicité
