Fixed Panels Installation - OVE JANIKE Manuel D'installation

1-2. Insert the fixed panel's bottom seal strips (N and L) at the base of the fixed panels (C and K). Cut the surplus part
with a cutter.
3. Insert the fixed panels (C and K) into the tracks (B). Do not fully tighten it as further adjustments may be required.
4. Slide the 2 stoppers (D) onto the support bar (F).
5-6. Loosely mount the support bar (F) onto the fixed panels (C and K) using the brackets (G) and level it.
7-8. Smoothly slide the fixed panel's support bracket (R) at the bottom of the fixed panel (C) and the guide (Q) at the
bottom of the fixed panel (K) both without securing. Ensure that the plastic gaskets are in the bracket (R) and the
guide (Q) as these protect the glass panels.
9-10. Mark the positions of the support bracket (R) and the guide (Q).
1
K
L
3
B B
K C
5
G
K
7
C
R

FIXED PANELS INSTALLATION

F
8
K
N
L
9
Q
R
10
2
C
N
4
D
D
F
6
F
G
C
10
Q