Auto Mode - ALPATEC Ligne BH3 Mode D'emploi

All manuals and user guides at all-guides.com
BH3_notice:RBH_notice 3/05/11 17:49 Page 10

AUTO MODE

Set the clock (see chapter TIME SETTING).
This function allows to program an operating range.
Set the desired temperature with Temperature+/- buttons (11)
Press once Prog. button (13), 'Auto on' is displayed.
Start:
Press Heure button and Minute button to select the time you required the heater to turn on.
Press again Prog. button (13), 'Auto off' is displayed.
Stop:
Press Heure button and Minute button to select the time you required the heater to turn off.
Press again Prog. button (13) 'Auto' is displayed.
Activation:
The Auto mode has come into effect. Timer light indicator lights on in green.
When the starting time is reached the heater will start and power light indicator (14) will light on in red. When
the time to turn off will be reached, the appliance will stop.
Desired temperature can be adjusted with Tem.+/Temp.- buttons any time.
Press Prog. Button. The screen display as follow:
Desactivation:
NOTE : In this case do not press, Puissance button, it will cancel programming. Even if On/Off button is Off
position, programming is cancelled.
ANTI-FROZEN POSITION
- Press "PUISSANCE" button (10). It is recommended to select the high power level.
- Set the temperature to 5°C with 'Temp.-' button.
- The appliance will switch on automatically when room temperature falls to 5°C to prevent freezing.
10