Date Setting - König KN-WS510N Mode D'emploi

All manuals and user guides at all-guides.com
GETTING STARTED
BACK UP POWER
The 3x 1.5 V AAA batteries can act as a backup power supply for the main unit.
1. Remove the battery casing.
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery changed.
NOTE: Do not use rechargeable batteries. We recommend that you use
alkaline batteries with this product for longer usage and lithium batteries in
temperatures below freezing.
AC/DC adapter
The adapter powers the unit. Plug the adapter into a socket, making sure the
adapter is not obstructed and is easily accessible by the unit.
To completely disconnect from the power, the adapter should be disconnected
from the main unit.
NOTE: The main unit and adapter should not be exposed to wet conditions. No
objects filled with liquid, such as vases, should be placed on the main unit or
adapter.
Set outdoor sensor
1. Remove the screws from the battery casing.
2. Insert the 3 AAA batteries, matching the polarity (+/–).
3. Select a channel: CH1/CH2/CH3.
4. Replace the battery casing and secure the screws.
5. Select the temperature, units: °C/°F.
6. Place the outdoor sensor less than 20 m from the main unit, and the sensor
should be positioned in an open area away from trees or other obstructions.
QUICK USER GUIDE
CLOCK/CALENDAR

Date setting

• Press [SET] for setting data, also the year, month and day will be flashing.
• Press UP or DOWN to change values in settings. Hold for more than two
seconds to adjust, the frequency will be 8 Hz.
4
ENGLISH