EDOBE LightSpeaker Guide Utilisateur page 13

All manuals and user guides at all-guides.com
B) Removal of the lens AFTER your LightSpeaker
been installed.
1) There are three small indentations around the
lens; with a small tip common screwdriver, nail file,
paper clip or similar object, gently slip the tip into
the indentation and pry the lens outward until the
retaining tabs pull free.
2) To re-install the lens, align the tabs and the
hole for the pairing LED, then push gently until the
locking tabs snap into place.
®
has
13