All manuals and user guides at all-guides.com
Step 4: Setting the Zone and L/R Stereo Switches.
A) Set the zone switch on the back of the
LightSpeaker
two zone system. For more on zones see Complete
System Manual or go to www.ebodeelectronics.eu.
B) Set the left/right stereo switch. "L" if it is the left
speaker, "R" if it is the right speaker.
C) Your LightSpeaker
to 4 pairs of (or 8 total ) speakers. If you are installing
more than one pair of LightSpeakers
want to divide your home into zones. See Complete
System Manual or go to www.ebodeelectronics.eu.
Step 5: Pairing The Transmitter to the speakers:
See Complete System Manual or go to
www.ebodeelectronics.eu.
Step 6: Enjoy your Lightspeaker
®
to one, unless you are setting up a
®
system allows you to install up
®
®
you will probably
!Helpful Hints
11