EDOBE LightSpeaker Guide Utilisateur page 10

All manuals and user guides at all-guides.com
®
Step 3: Fit your LightSpeaker .
®
Your LightSpeaker is designed to fit directly into most
recessed fixtures, table lamps and pendants by simply
removing the existing light and, in the same manner as a
®
light bulb, re-installing your LightSpeaker in its place.
®
Because of all the technology packed into LightSpeaker ,
it is much larger than a normal light bulb, both in length
®
and width. The best way to use Lightspeaker is in a
fitting where you cannot actually see the sides of the
product at all. As long as the front grille is unrestricted
so you can hear the music and see the light, you do not
really want to see where the sound and light comes
from. In general this means that the ideal is a long, slim
lampshade rather than one short and wide.
Please give this some thought when choosing a fitting for
®
your LightSpeaker .
Please note - between the front edge of the E27 socket in
®
your fitting and the front grille of LightSpeaker you need
to have a shade/fitting that will be at least 15 cm long
and 14 cm wide
At www.ebodeelectronics.eu you can find a selection of
®.
lampmodels that will work with LightSpeaker
10