Remote Control - Insignia NS-LCD26-09CA Guide De L'utilisateur

Insignia NS-LCD26-09CA 26" LCD TV 720p
# Jack Description
11 AV 2 IN L and R Connect the audio for the composite or
audio S-Video device connected to the AV 2
IN VIDEO or AV 2 IN S-VIDEO jack. For
more information, see "Connecting a
composite video device" on page 8 or
"Connecting an S-Video device" on
page 8.
12 AV 2 IN VIDEO Connect a composite video device to
this jack. For more information, see
"Connecting a composite video device"
on page 8.

Remote control

4
5
6
7
8
9
10
11
12
13
14
15
16
17
# Button Description
1 Press to turn on your TV or put it into
POWER
Standby mode. For more information,
see "Turning your TV on or off" on
page 11.
2 INPUT Press to select the video input source.
For more information, see "Selecting
the video input source" on page 12.
3 DISPLAY Press to display status information.
For more information, see "Displaying
status information" on page 12.
4 VIDEO Press to toggle between S-Video and
composite video input source modes.
5 Numbers Press to enter channel numbers.
In the on-screen menu, press to enter
the parental control password.
# Button
6 VGA
7 VOL+
8 MUTE
9 VOL–
10 ZOOM
11 MENU
12
13 ENTER
18
19
14 P-LOCK
20
15 VGA ADJ
21
16 SLEEP
22
17 PICTURE
23
24
18 COMP
19 TV
25
26
20 HDMI
27
28 21 RECALL
22 CH
23 CH
24 EXIT
25 MTS/SAP
26 CCD
27 COLOR TEMP
28 AUDIO
www.insignia-products.com
Description
Press to select a connected computer
as the video input source.
Press to increase the volume.
Press to turn off the sound. Press
again to turn the sound back on.
Press to decrease the volume.
Press to select the aspect ratio. For
more information, see "Selecting the
aspect ratio" on page 13.
Press to open the on-screen menu.
Press to move up, down, left, or right
in the on-screen menu.
Press to confirm changes or turn
options on or off in the on-screen
menu.
Press to open the password box. After
you enter the password, you can adjust
parental controls. For more
information, see "Setting parental
controls" on page 15.
Press to open the VGA adjustment
menu. You can select Auto adjust,
H position, V position, Clock, or
Phase.
Press to set the sleep timer. For more
information, see "Setting the sleep
timer" on page 14.
Press to select a picture mode. You
can select STANDARD, MILD, VIVID,
or PERSONAL. For more information,
see "Selecting a picture mode" on
page 12.
Press to select a connected component
video device as the video input source.
Press to select your TV as the video
input source.
Press to select a device connected to
the HDMI 1 or HDMI 2 jacks as the
video input source.
Press to go to the previous channel.
Press to go to the next channel in the
channel list.
Press to go to the previous channel in
the channel list.
Press to close the on-screen menu.
Press to select the sound mode. You
can select MONO, STEREO, or SAP
(secondary audio program).
Press to turn closed captioning on or
off. You can select CC OFF, CC ON, or
CC ON WHEN MUTE. For more
information, see "Viewing closed
captioning" on page 15.
Press to adjust the color temperature.
For more information, see "Adjusting
the color temperature" on page 13.
Press to select the audio mode. You
can select MUSIC, THEATER,
PERSONAL, or VOICE. For more
information, see "Selecting the audio
mode" on page 13.
5