Weidmüller PrintJet Mode D'emploi page 9

2. In the window that opens, click on the button corresponding
to your language.
3. Click on the PrintJet Driver button.
Installation for Windows NT
If you wish to connect the PrintJet to a network, pleased
remove the Status Monitor:
1. Go to: Start > Settings and click to Epson Stylus Color
2. Please open the printer settings
3. Go to the register Utility and click to the Button Speed
& Progress
4. Please remove the check mark at show progress meter
5. close all windows with OK.
4. This opens the software installation program; click on Next in
order to start the installation routine.
5. Follow the instructions on the screen.
3. Basic settings in the printer driver
1. Click Start, point to Settings, then click Printers.
2. For Windows 2000 users, select your printer, then click
Printing Preferences on the File menu.
All manuals and user guides at all-guides.com
For Windows NT 4.0 users, select your printer, then click
Document Defaults on the File menu.
For Windows 98 and 95 users, select your printer, then click
Properties on the File menu. The printer driver opens.
3. Enter the following values:
4. Please change the DPI-figures up to Photo -1440 dpi
5. Confirm with OK.
6. Go to the register Paper and make the following settings.
black
custom
advanced
Photo-1440 DPI
9