How To Clean - Gloria ProControl 100 Notice D'utilisation Et D'entretien

2.10 How to lock the trigger valve off
For blocking the trigger control valve move the small slide valve forward
(fig. 12). To release the blocking move the slide valve into the opposite
direction (fig. 13).
Fig. 12
3. Cleaning and storing
3.1

How to clean

Note: If the sprayer is pressurized, release air pressure before cleaning.
Clean the sprayer every day after use.
Do not let spray liquid in the tank after use. After complete emptying fill the
tank ¼ with water. Pressurize tank and spray. The spraying lance must be
unscrewed from the trigger control valve. After emptying and opening the
tank drain, discharge line by holding it upward and at the same time operate
the trigger control valve. Depending on the extent of dirt, clean nozzle and
strainer with water after dismantling. Nozzle can be removed from spraying
lance after loosening screwed cap.
After unscrewing the hand tube from the trigger control valve (fig. 14), the
strainer must be removed from the housing.
Fig. 14
After cleaning we recommend the tank be hung upside down with the cover
open.
3.2 How to store
Before storing for a long period, it is necessary that all parts are completely
dried.
Seite/Page 12 von/of/de 26
All manuals and user guides at all-guides.com
Fig. 13